Silver Coat Protection 1 Pint

Protective coating against UV’s for Turbo Poly Seal

  • 1 Pint will cover 1 Gal of Turbo Poly Seal
  • Wait 30 minutes for Turbo Poly Seal to cure before applying
  • Check every 4 – 5 years if a fresh coat is needed
  • Shelf life after opened – 3 years or more ( if properly sealed)

Non-Fibered Aluminum Coating made from selected asphalts, refined solvents, and fine aluminum flakes. When the coating is applied it forms a reflective, metallic shield over the base material. The combination of these two protective materials, aluminum, and asphalt results in a self-protecting coating with longer-lasting moisture and heat-resistant properties.

$15.00

Additional Information

Weight 2 lbs
Dimensions 5 × 5 × 5 in
Silver Coat

Protective Coating for Turbo Poly Seal:
1. Let the Turbo Poly Seal cure for 24 hours
2. Stir the content of Silver Coat well to mix the aluminum flakes into the asphalt liquid
3. Use a brush and apply 1 coat over the Turbo Poly Seal

You may also like…