Super Silicone Seal 2 Gal Pail

This Roof Coating will REPAIR water LEAKS on ROOFS. Fixing leaky Rubber ROOF stopped water leaks. Watch how I went about saving the owner from having to replace this roof. Even Roofing Contractors don't know this secret. A Do It Yourself Repair. This method will extend your flat roofing rubber by 5 - 10 years. No need to call Roofing Contractors to do any roof repair. To buy Turbo Poly Seal or Super Silicone Seal - https://bergstromm.com/ This method can be applied to metal roofs, torch down roofs, EPDM Rubber Roofs, and TPO Roofs.
Super Silicone Seal - https://bergstromm.com/
In this video you will see:
1. The heat difference from a black rubber roof to a white-coated rubber roof
2. Flexibility test between roofing products
3. Best practice to save your rubber roof
4. How to calculate the cost of repairing your own roof per square feet
5. Tools you need for roofing repairs
6. The importance of a protective coating against Ultraviolets and heat

0:00 How to save an EPDM Rubber Roof
0:28 Seam Tape destroyed by heat
0:44 Roof Temp over 180 F
1:06 Rubber is very thin
1:17 Explaining the concept
1:40 No need to clean thoroughly
1:57 Proof that SSS sticks well
2:35 Whar other Roofers do
2:50 How to repair seam with SSS
3:54 Painting Seams to extend the life
4:47 Old Silicone Coated Roof
5:44 Flexibility Test between products
7:00 Showing Stretchability
7:36 How much 1 Gal covers
10:30 End

This is one of the best videos to get knowledge on rubber roofing that can help you make decisions on your next flat roof repair.
You can avoid the expense of a new Rubber Flat Roof if you would only follow the instructions in this video. Learn from the experience of The Flat Roof Doctor to make the proper decision.
EPDM Rubber Roofs are known to leak within 5 years of installation. The best practice would be to protect every seam and flashing from the heat and ultraviolet rays. This way you will extend your EPDM Roof life expectancy. Coating the seams with Super Silicone Seal from Bergstromm.com will reduce the heat on all the seams and at the same time protect the cover tape from ultraviolet degradation.
The cost is very low when you do this repair within a few years of the installation of your rubber roof. A five-gallon pale of Super Silicone Seal will cost approximately $400 and a 6" roller and handle and you can cover all the seams on a fairly large EPDM Rubber roof.

How to repair or extend the life of an EPDM Rubber Roof:
1. Brush clean all the seams with a stiff bristle brush to remove debris and dust that has caked on
2. Use a leaf blower to remove dust and debris
3. Buy Super Silicone Seal from Bergstromm.com
4. Shake the pale or stir with a paint stirrer
5. Apply one coat of Super Silicone Seal with a six-inch roller
6. Apply a second coat the following day

By following these steps above you will extend your roof's life and eliminate repairs in the future.
The super Silicone Seal bonds to the EPDM and reduces the heat by 50% on any sunny day. In the video, you will see where I measured the heat and in some areas, the roof temperature was 180 degrees Fahrenheit.

1.6K 152

Flat Roof Repair in 3 easy steps that will last. EPDM Rubber roof fixed in 5 min
Video on EPDM Rubber Seam Repair - https://youtu.be/sxXBS0v3hVY

This easy Rubber Roof Repair Kit will save all roofs with leaks. Do It Yourself.
To buy Turbo Poly Seal or Super Silicone Seal - https://bergstromm.com/
This video will show:
1. No preparation is needed
2. How to fix an EPDM Seam
3. Ho to make a transition to a drip edge
4. How to save EPDM Roofs
There is no need to replace your rubber roof anymore. With Super Silicone Seal, you can extend the life of your roof over 10 years.
The best advice on repairing an EPDM roof is displayed in this video https://www.youtube.com/watch?v=sxXBS0v3hVY.
By watching this video, you will see how easy it is to repair an EPDM Rubber roof, and you can save 1000's dollars by doing it yourself.
It is important to know that ultraviolet and heat are what destroy EPDM Rubber. Applying a coat of Super Silicone Seal over every seam will extend the life of your EPDM roof for many years.

0:00 EPDM Rubber Roof
1:10 Prepping the surface
2:24 Applying Super Silicone Seal
2:58 Embedding polyester fleece
3:30 Applying 2nd coat SSS
5:17 End Bla Bla Bla

388 54

See how Metal Roof Coatings can DESTROY your roof and the Solution on How to repair the leaks.
The best solution for leaky seams on Metal Roofs is Super Silicone Seal. Cleaning a seam is always the hardest. Making the transition repair over the seam is very easy.
The Pros of Super Silicone Seal:
1. It sticks to metal, plastic, rubber, and asphalt
2. It is white and therefore reflects heat preventing the repair overheating
3. The Silica in the sealant is not affected by ultraviolets which destroys most products
4. It is super flexible
5. It is easy to apply
Super Silicone Seal can be purchased at https://bergstromm.com/

0:00 Why never use Acrylic Coatings
1:00 Showing coating shrink
1:55 Coating Rusting metal seams
2:15 Cleaning Seam with Grinder
2:56 Screwing down seams together
3:13 Cut Polyester Fleece to apply
3:25 Super Silicone Seal Seam Repair
4:54 Results after months
5:28 End Flat Roof Doctor

96 23

Repair annoying persistent leaks on Metal Roofs permanently with Super Silicone Seal. When a metal roof has been coated with acrylic paint, the chances are that it will start leaking more than before within a few years. Watch this video to see how to combat these leaks that can destroy your metal roof.
Super Silicone Seal can be bought at https://bergstromm.com/

The metal roof in this video was coated with Acrylic Coating. This is a bad idea. See how to fix the seams from leaking. This video will show you how you can save your metal roof from a disaster. So many people try to fix metal roof seams with TAR, SILICONE, TAPE, CAULKING but make a bigger mess every time.
See how to reverse a mess others have made and save your metal roof.

0:00 See the issue - Acrylic Coatings
0:43 Cutting away Acrylic Coat to see
1:43 3D video Why Metal Seams leak
3:51 Using Angle grinder to clean up
4:51 Screw panels with Pan Head screws
5:12 3D video Showing the repair
7:29 Using Super Silicone Seal at the seam
8:11 Install Polyester fleece over SSS
8:36 Applying 2nd coat SSS
9:51 Showing Results after months
10:35 End Bla Bla Bla

72 16

Super Silicone Seal - Seam Repair EPDM - https://youtu.be/sxXBS0v3hVY
How To Repair a Flat Roof leak. This 3D video explains why Metal Roof Seams leak and How to make repairs on any flat roof. When a seam separates on a Flat Roof, you can easily repair it with Super Silicone Seal.
https://bergstromm.com/
If you have seams that are leaking on any roof, whether it be a metal roof, rubber roof, or an EPDM Roof, it is best to make the seam repairs as soon as possible.
Metal roof seams will rust and if not fixed in time, the roof will be beyond repair in no time.

0:00 How to Repair Metal Roof Seam
0:00 Gasket between panels
0:22 Hexagon Screws with washers
0:45 Leak at screw gasket block water
0:56 Water trapped in between panels
1:10 remove Hexagon Screws
1:24 Use Angle grinder to remove rust
1:36 Use pan head screws replacement
1:48 Use Super Silicone Seal to repair

688 34

Seal any Roof Leak whether it be a Chimney Cap Leak, Rubber Roof Seam, Skylight Leak, with Super Silicone Seal in 5 min with little preparation. This is a DIY repair kit that will save you lots of money. No need to contact a roofer to fix leaks
Super Silicone Seal can be bought at https://bergstromm.com/
Super Silicone Seal will adhere to almost any surface. It is good for skylight leak repairs making a transition from the metal frame to the glass.
It will seal cracks on chimney crowns.
Super Silicone Seal is excellent for repairing seams on a rubber roof.
There are many uses and benefits for this product that help make Repairs a breeze.
00:00 Sealing Metal Ductwork
00:57 Chimney Cap Sealed
02:27 Skylight Sealed
03:28 Rubber roof low spot filled
04:04 Rubber Roof Seam sealed

Four Easy Steps on How to repair leaks on Chimneys, Skylights, and Rubber Roofs:
1. Wipe clean the surface with a rag
2. Brush on a coat of sealant over the seam or crack about 2 inches on either side
3. Apply the polyester fleece embedding it into the sealant
4. Apply a second coat covering the fleece

For cleaner results, you can use masking tape to tape the area off where you don't want any of the sealants. Remember to remove the masking tape as soon as you have applied the second coat before it cures.

In many cases, you don't need to use Polyester Fleece.
Super Silicone can be used to build up a low spot where water is pooling on a roof.

47 6

Turbo Poly Seal https://bergstromm.com/
How to repair the flashing on a leaky flat roof.
Follow these steps:
1. Remove all old caulking and tar that was used to seal the flashing
2. Use an angle grinder with a hard-wire steel cone brush to remove about five inches of paint on the brick or cement wall above the metal flashing
3. Wipe the metal flashing thoroughly with lacquer thinners to remove any residue of silicone from the metal
4. Use masking tape to seal about three inches on the wall above the metal and also 2 inches below the grove on the metal. (this is for making it look clean when done)
5. Apply one coat of Turbo Poly Seal covering the entire area between the two masking tapes.
6. While wet, embed the Polyester Fleece into the Turbo Poly Seal
7. Apply a coat of Turbo Poly Seal to cover the entire fleece
8. Wait 10 min and then remove the masking tape.
8. After a few days, the Turbo Poly Seal flashing can be painted with urethane-based paint.
Another Video on Coatings - https://www.youtube.com/watch?v=tEBIPqEvn7A
Silver Coating, How to use it - https://www.youtube.com/watch?v=MrQEQcrjwFI&t=8s
This will help you to understand Why it is not a good idea to Coat a Metal Roof. Also How to repair holes in a metal roof and make it leakproof with Super Silicone Seal and Silicone Patch.
This is a detailed process on how to prepare and clean the screw before applying a sealant.
Super Silicone Seal - https://bergstromm.com/product/super-silicone-seal-roof-repair-kit-5-feet/
Silicone Patch - https://bergstromm.com/product/silicone-patch-2-gal-pail/

0:00 Why not coat a metal roof
1:32 Screws rust due to coating
3:54 Clean the screws and seal them
5:06 Using an angle grinder
6:31 How to patch a rusted hole
8:20 Showing the results the next day
9:41 Seal screws using Super Silicone Seal
10:49 Showing the girl that does it all

104 21

Repairing Rusted Metal Roof with pooling water
Watch this video for Metal Roof Seam repair - https://www.youtube.com/watch?v=gVdrrfe_lBY&t=7s
See how to Patch Large Holes in A/C ductwork with Silicone Patch. This is a permanent solution to fix rusty holes on top of A/C units, ductwork, and metal roofs.
See how the Silicone Patch looks like after it rained underwater.
To buy Silicone Patch go to https://bergstromm.com/

0:00 Quick Patch on Rusted hole
1:00 Grind area clean
1:46 Using Silicone Patch
2:12 Polyester Fleece
2:33 Second coat of Silicone Patch
3:40 Results after a week
4:24 Screws rust on metal roof
5:00 Using Silicone Patch over screws

84 6

Watch video on Repairing Metal Roof Seam https://www.youtube.com/watch?v=-QG1KeMoqKU
Repairing a Metal roof seam. The transition from a high pitch roof to a low slope needs to be sealed with Silicone Patch
https://bergstromm.com/product/silicone-patch-2-gal-pail/

0:00 Transition causing leaks
1:40 Understanding what leak
3:46 Preparing to seal the seam
5:22 Using Lacquer Thinners
7:04 Using Masking Tape
8:36 Seal Seam after preparation
13:22 The results after 1 day

861 88