This video shows an easy method of Siding or Wall Leak Repair. A quick repair can save you a lot of trouble.
How to identify when siding is causing the leak on your roof.
1. If you notice a leak inside your house, try to locate that same spot above on the roof
2. investigate the general area to see if the flashing is good
3. If the roof and flashing is still holding, look just above that area where you thought the roof or flashing was leaking, and look for cracked boards on the siding
4. Painters often use caulking to seal the cracks on the siding that then dries out and crack over time
5. The paint could also be cracked
6. Once you find a cracked board, then use Turbo Poly Seal to make the necessary repair
The Turbo Poly Seal can be bought at this link https://bergstromm.com/
0:00 Siding causes leaks
0:34 How to remove paint on the siding
1:09 Screw down the siding
1:45 Turbo Poly Seal
2:10 Embedding Fleece into Turbo
2:29 Top Coat of Turbo Poly Seal applied
2:40 110 degrees Thanks for watching
How to use Turbo Poly Seal to repair cracked si=ding causing leaks:
1. Sand the area and remove most of the paint
2. Apply 1 coat of Turbo Poly Seal with a brush covering at least 2 inches on either side of the crack
3. Embed the polyester fleece in the Turbo
4. Apply a Topcoat of the sealant over the fleece
5. After curing for 24 hours, you can then paint the area that you have repaired with a color of your choice