How to make a Cracked Wall Repair
This video demonstrates how easy it is to repair cracks permanently on top of walls and in the stucco.
Turbo Poly Seal – https://bergstromm.com/
Chapters:
0:00 Cracked Wall Repair
0:33 Remove Paint
1:05 Cut Fleece in half
1:40 1st coat Turbo Poly Seal
2:48 Covering seam
3:55 Results after a day
4:33 Silver Coat Protection Mixing
5:57 Painting on Sealant Protector
General steps for crack repairs:
1. Use an angle grinder with a wire brush to remove paint, caulking, and loose cement
2. Apply 1 coat of Turbo Poly Seal over crack covering at least 2 inches on either side of the crack
3. Embed the Polyester Fleece into the Turbo Poly Seal
4. Apply a top coat of Turbo Poly Seal covering the fleece completely
5. Wait approximately 1 – 24 hours and then paint 1 coat of Silver Coat Protection covering all areas of Turbo Poly Seal