How to repair a Gutter Leaking – Turbo Poly Seal DIY

Anyone can repair a Gutter Leak. Tar and caulking are not the answer. See how to patch a gutter under three minutes Do It Yourself. Fixing Vent pipe leak: https://youtu.be/ulVZKIvWykY
To buy Turbo Poly Seal or Super Silicone Seal – https://bergstromm.com/
It is common for copper to crack over the years where it has been folded before. Copper seams that have been soldered will also crack and cause leaks. To repair the seams where two copper pieces join, do the following.
https://bergstromm.com/

1. Remove any old caulking or tar.
2. Use Lacquer Thinners to wipe clean the area where the patch will be
3. Tape off the area with masking tape
4. Apply one coat of Turbo Poly Seal covering at least 3 inches on either side of the joint or crack
5. Install Polyester Fleece over the freshly painted surface
6. Apply another coat of Turbo Poly Seal covering the entire area between the masking tape
7. Remove masking tape after 5 minutes

Turbo Poly Seal is a tried and tested product that will extend the life of your copper flashing and copper gutters.

0:00 Start
0:44 Explaining the problem
1:50 Preparing
2:30 How to remove old dry tar
4:36 1st Coat Turbo Poly Seal
5:44 Embedding Fleece
6:14 2nd Coat Turbo Poly Seal
7:30 Results

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.