Turbo Poly Seal – https://bergstromm.com/product/turbo-poly-seal-1-gal-50-ft-fleece/
How to Repair Leaking Chimney Flashing. This is a True and Tried method that will last and it makes it easy to repair any leak on any chimney.
Turbo Poly Seal is a composition of Asphalt and urethane resins. This is why it is so versatile adhering to almost any surface.
This will adhere to copper, metal, brick, cement, and concrete
7 Steps to Repair Chimney Flashing Leak:
1. Remove any loose caulking
2. Mask tape about 3″ wide area around the flashing and brick area
3. Apply 1 coat of Turbo Poly Seal with a disposable brush
4. Embed a 2″ fleece into the freshly painted sealant
5. Apply a top coat of Turbo Poly Seal over the fleece
6. remove the masking tape
7. Use Lacquer Thinners with a rag to remove any excess or spillover sealant from the metal
Chapters:
0:00 How to seal Chimney Flashing
0:12 Apply masking tape
0:22 Apply Turbo Poly Seal
0:32 Cut Fleece to 2″ strip
1:19 Removing the masking tape