YouTube Videos

The ultimate draining system that will prevent a roof from flooding. Flat Roof Drains design and installation are very critical. Most drains are elevated higher than the roof surface itself. This issue can be found in 80% of flat roofs. Lowering the drain into a catch basin will solve this issue. The catch basin is […]

Repairing leaking Vent Pipes in 3 easy steps. See how to make flashing that lasts around vent pipes and skylights. We have used this technique for many years and it works. A common cause for roof leaks is vent pipes and other protrusions. The roof boot or flashing is what needs repairing.

The 3 most common roof systems used in the US with their advantages and disadvantages are explained. EPDM Rubber – TPO Vinyl – Modified Bitumen Torch Down Rubber Membranes EPDM Rubber is a synthetic rubber that is 60 thousand of an inch thick or the equivalent of a quarter coin. Adhesives are used to bond

There are three roofing materials commonly used for flat roofs. Get inside information on the pros and cons of EPDM Rubber, TPO Vinyl, and Modified Bitumen Torch down roofing systems. Authentic videos show the advantages and disadvantages of each flat roof system. Most Roofing Contractors will sell a potential owner an EPDM Rubber Roof. This

Most roof leaks start at flashing on a flat roof. The flashing on a wall is only sealed with caulking. When the caulking dries out, the flashing is compromised.

Chimneys can cause leaks into a home. Make sure you have your chimney checked to avoid structural damage to the chimney due to cracks and icing in the winter.

3 D video showing how improper installation of flashing on a chimney can cause leaks on a flat roof.

EPDM Rubber membrane and TPO Vinyl are not protected against Ultraviolet rays. Both these roofing systems have shown failures due to ultraviolet exposure. There are coatings that can be applied to protect these membranes but the owner is never informed of the need to do so. This means that EPDM roofs don’t last 5 years

This is a 3D video showing where and how a skylight can leak. The gasket that seals between the glass and the metal frame is what dries out and perishes and causes a leak. This happens more on flat roofs than shingle roofs.

Showing how an A/C curb is vulcanized and installed on an EPDM rubber roof. It is important for the A/C contractor to mark exactly where the curb should be installed. http://www.commercialroofusa.com