How to repair a leaky seam on a flat roof
Turbo Poly Sewal – https://bergstromm.com/

8 Steps to Making a Roof Repair:
1. When a Rubber Roof Seam needs to be sealed
2. If necessary, brush off any dirt or debris so it is dust-free.
3. If cualking was used before, remove it.
4. Use Turbo Poly Seal – Stir the content.
5. Brush 1 coat over the area of repair
6. Cut a piece of the Polyester Fleece and place it over the 1st coat
7. Paint a final coat covering the fleece entirely.
8. If necessary, a Silver Coat Protection can be used to coat over the Turbo Poly Seal after it is cured to protect against ultraviolet light.