Turbo Poly Seal - the Ultimate Sealant

Enhanced Durability

Turbo Poly Seal provides long-lasting protection on flashing and seam repairs

Easy Application

It is simple to apply—just brush on, add a fleece and add another coat

Versatile Use

Ideal for a variety of surfaces, Metal, Asphalt, TPO, and Modified Bitumen Rubber

Cost Effective

Even with no experience and little preparation anyone can use it.

Turbo Poly Seal for all repairs

Where and Where not

Instructions on How to Use Turbo Poly Seal

  1. Prepare surface – Use angle grinder with metal brush to remove silicone, oil and other debris. Other surfaces use rag and water to clean surface. Remove loose paint
  2. Stir content well
  3. Use disposable brush to apply 1st coat – make sure to cover 2 inches on either side of crack, hole, transition, or seam
  4. Cut polyester fleece to size and embed it into the 1st coat
  5. Apply another coat to cover the polyester fleece completely.
  6. Do not use fleece over metal screws – just dab the screws with Turbo
  7. Use Lacquer Thinners to clean up any mess.
  8. Dispose of the brush
  9. If there is any content left in container, make sure to close it very tight for later use. Plan to use the rest within weeks after opening the container. Turbo Poly Seal will cure in the container if left for to long

Chimney Crown

Metal Roof Seam

Rubber Roof

Vent Pipes

Real Reviews Collected from our site